Table of Contents
Advertisement
Symptoms
dE4
42
Reason
Ensure door is not open.
Door sensor has malfunctioned.
Thermistor control error.
Water overfills due to a
malfunction or excessively high
water pressures.
Malfunction of water level sensor.
Over load in motor.
Water leaks.
The washer experienced a power
failure.
Does not dry (only on combo
dryer models)
Is Inlet/outlet hose or drainage
pump frozen?
Solution
• Close the door completely.
If '
,
,
,
call for service.
• Unplug the power plug and call for
service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Allow the washing machine to stand for
30 minutes to allow the motor to cool,
then restart the cycle.
• Call for service.
• Restart the cycle.
• Call for service.
• Supply warm water into the tub and
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
' is not released,
Advertisement
Table of Contents
