Table of Contents
Advertisement
Option Programme
Delay End
You can set a delay end so that the washing machine
will start automatically and finish after a specified time
interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set time required.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running time may
vary due to water temperature, wash load and other
factors.
• To cancel the delay end function, the power button
should be pressed.
• Avoid using liquid detergent for this option.
26
Favourite
Favourite programme allows you to store a customized
wash programme for future use.
1
Press the Power button.
2
Select a washing programme.
3
Select the cycle (Washing method, number of
rinses, spin speed, water temperature etc.).
4
Press and hold the Favourite button for 3
seconds.
The Favourite option is now stored for future use.
To reuse the programme, select Favourite programme
and press the Start/Pause button.
Wash
Turbo Clean
Wash cycle in under 1 hour with energy and water
saving. (based on half of laundry)
Intensive
If the laundry has both normal and heavily soiled clothes,
then the Intensive option is effective.
Refer to page 23 for programmes that will allow an
Intensive option.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected programme.
Press this button until the desired setting is lit. All rinses
use cold tap water.
• Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results. Not all temperatures can be
selected on all cycles.
Advertisement
Table of Contents
