Cleaning the Dispenser Drawer
Detergent and fabric softener may build up in the
dispenser drawer. Remove the drawer and inserts and
check for buildup once or twice a month.
1
Remove the detergent dispenser drawer by
pulling it straight out until it stops.
• Press down hard on the disengage button and
remove the drawer.
2
Remove the inserts from the drawer.
• Rinse the inserts and the drawer with warm
water to remove buildup from laundry products.
Use water only to clean the dispenser drawer.
Dry the inserts and drawer with a soft cloth or
towel.
3
To clean the drawer opening, use a cloth or small,
non-metal brush to clean the recess.
• Remove all residue from the upper and lower
parts of the recess.
4
Wipe any moisture off the recess with a soft cloth
or towel.
5
Return the inserts to the proper compartments
and refit the drawer by reverse method.
Tub Clean (Optional)
Tub Clean is a special programme to clean the inside of
the washing machine.
A higher water level is used in this programme and a
higher spin speed. Perform this programme regularly.
DO NOT add clothing when engaging the Tub Clean
function.
1
Remove any clothing or items from the washing
machine and close the door.
2
Open the dispenser drawer and add anti-limescale
(e.g. Calgon) to the main wash compartment.
• Cleaning tablets can be placed directly into the
drum.
3
Close the dispenser drawer slowly.
4
Power On and then press and hold the Tub Clean
buttons for 3 seconds. Then 'Tub Clean' will be
displayed on the display.
5
Press the Start/Pause button to start.
6
After the programme is complete, leave the door
open to allow the washing machine door opening,
gasket and door glass to dry.
CAUTION
• Children should be supervised so that they do not play
with the washer during this operation, or whilst the
door is open at any time.
NOTE
• Do not add any detergent to the detergent
compartment during the Tub Clean operation.
Excessive suds may generate and leak from the
washing machine.
35