LG WD1611SMW2 Owner's Manual page 28

Rinse
Rinse + +Hold
Add rinse once then after rinsing process, the
programme is paused until start button is pressed again.
Normal+Hold
The programme is paused until start button is pressed
again when rinse is finished.
Rinse ++
Adds 2 additional rinses.
Rinse +
Adds an additional rinse.
Spin
• Spin speed level can be selected by pressing the Spin
button rotate slowly.
• Spin Only
1
Press the Power button.
2
Press the Spin button to select RPM.
3
Press the Start/Pause button.
NOTE
• When you select 'No Spin', it will still rotate for a short
time to drain quickly.
Remote Start ( )
Use a smart phone to control your appliance remotely.
You can also monitor your programme operation so you
know how much time is left in the cycle.
NOTE
• You must first connect to a gateway and register your
appliance in order to use the Remote Start function.
To use Remote Start:
1
Press the Power button.
2
Press and hold Remote Start button for 3
seconds to enable Remote Start function.
3
Start a cycle from the LG SmartThinQ application
on your smart phone.
NOTE
• If you do not start your appliance, it will wait to start
a cycle until you turn off your appliance from the
application or disable the Remote Start function.
To disable Remote Start:
When the Remote Start is activated, press and hold
Remote Start button for 3 seconds.
27