LG WD1611SMW2 Owner's Manual page 30

Child Lock
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the Control Panel
1
Press and hold the Child Lock button for 3
seconds.
2
A beeper will sound, and 'Child lock is on' will
appear on the display.
When the Child Lock is set, all buttons are locked
except the Power button.
NOTE
• Turning off the power will not reset the child lock
function. You must deactivate child lock before you
can access any other functions.
Unlocking the Control Panel
1
Press and hold the Child Lock button for 3
seconds.
2
A beeper will sound and the remaining time for the
current programme will reappear on the display.
Add Item
Laundry can be added or removed after the washing
programme is started.
1
Press the Add Item button.
2
Open the door after door lock is released.
3
Add or remove laundry.
4
Press the Start/Pause button again to continue
the cycle. The cycle continues automatically.
NOTE
• For safety reasons, the door remains locked when the
water level or temperature is high. It is not possible to
add laundry during this time.
• If the water temperature in the drum is high, wait until
it cools down.
CAUTION
• When adding laundry, make sure to completely push
it into the drum. If laundry gets stuck in the door latch
hole, the rubber packing may be damaged, causing
water leakage and malfunction.
• Forcing the door open may cause part damage,
destruction, or safety problems.
• When opening the door during a wash, caution should
be taken to avoid scalding or water overflowing onto
the floor.
29