Installation Information - Viessmann Vitosol 200-F Installation Instructions For Contractors

Components
qI Top panel

Installation information

Required roof area: 2700 x 2700 mm
■ To prevent any damage to the ridge
cover, allow sufficient clearance on the
ridge side; at least 3 rows for tiled
roofs.
Note
In the case of tiled roofs, we also rec-
ommend keeping a width of at least
3 tiles at the bargeboard.
■ If necessary, install a snow guard.
6
(cont.)
(for roof tiles and barrel roof tiles
with sealing strips)
qO Lower flashing
■ Provide a roof hatch near the collec-
tors for inspection and maintenance.
■ Take additional measures on site to
protect against water penetrating as a
result of snow and wind pressure,
e.g. sarking membranes (accesso-
ries).