General Installation Information - Viessmann Vitovolt 200 Technical Manual

3.3 General installation information

H Observe max. load and distance from
the edge of the roof for the substructure
to DIN 1055.
H In the case of flat roofs with plastic
roofing membranes, install supports
only with an intermediate layer
(protective mats).
VITOVOLT
H The connection cables must be routed
through a suitable outlet (ventilation
tile).
Roof tile Vent cross−section
2
cm
Type
Frankfurter tile 32
Double S 30
Taunus tile 27
Harz tile 27
3.3 General installation information
H Safeguard the connecting cable against
attack by birds and small animals.
H Provide a trap door in the roof in the
vicinity of the photovoltaic panels to
facilitate inspection and maintenance.
17