Installation with rafter hooks
For tiled roof cover
Components
1
5
1 Rafter hook
2 Support bracket
3 Screws
Fitting the rafter hooks and mounting rails
2 adjacent rafters are used to fit the raf-
ter hooks:
2
3
6
4
4 Mounting rail
5 Mounting plate
6 Clamping bracket
■ Version I:
Fitting rafter hook 1 onto counter bat-
ten C with support bracket 2
■ Version II:
Fitting rafter hook 1 directly onto raf-
ter B
■ Trim the pantiles with an angle grinder,
for example by removing drip tabs.
5