Viessmann Vitosol 200-F Installation Instructions For Contractors
  1. Manuals
  2. Brands
  3. Viessmann Manuals
  4. Solar panel
  5. VITOSOL 200-F
  6. Installation instructions for contractors

Viessmann Vitosol 200-F Installation Instructions For Contractors

Flat-plate collector for pitched roofs, above roof installation for 2 collectors
Hide thumbs Also See for Vitosol 200-F:
Table of Contents

Advertisement

Quick Links

Download this manual
VIESMANN
Installation instructions
for contractors
Vitosol 200-F
Type SVK
Flat-plate collector for pitched roofs, above roof installation for 2 collectors
VITOSOL 200-F
Dispose after installation.
5513 028 GB
2/2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vitosol 200-F and is the answer not in the manual?

Questions and answers

Related Manuals for Viessmann Vitosol 200-F

Summary of Contents for Viessmann Vitosol 200-F

  • Page 1 VIESMANN Installation instructions for contractors Vitosol 200-F Type SVK Flat-plate collector for pitched roofs, above roof installation for 2 collectors VITOSOL 200-F Dispose after installation. 5513 028 GB 2/2014...
  • Page 2 Safety instructions Please follow these safety instructions closely to prevent accidents and material losses. Safety instructions explained Please note This symbol warns against the risk of material losses and environmental pollution. Note Details identified by the word "Note" contain additional information.

  • Page 3: Table Of Contents

    Index Intended use ........................Installation sequence Installation with rafter hooks ..............Components ..................■ Fitting the rafter hooks and mounting rails ......... ■ Installation with rafter flange ..............Components ..................■ Fitting the rafter flange and mounting rails ......... ■ Installation with roof hooks ..............

  • Page 4: Intended Use

    Intended use The appliance is only intended to be installed and operated in sealed unvented systems that comply with EN 12828 / DIN 1988, or solar thermal systems that comply with EN 12977, with due attention paid to the associated installation, service and operating instruc- tions.

  • Page 5: Installation Sequence Installation With Rafter Hooks

    Installation with rafter hooks For tiled roof cover Components Fig. 1 Rafter hook Mounting plate Support bracket Clamping bracket, external Screws Clamping bracket, internal Mounting rail Fitting the rafter hooks and mounting rails A specific number of rafters is used for fitting. This number depends on the rafter spacing.
  • Page 6 Installation with rafter hooks (cont.) Version I: Please note ■ Fit rafter hook to counter batten using support Take care to avoid breaking tiles. The rafter hook must not be supported by the bracket pantiles. Observe the dimensions. Version II: ■...
  • Page 7 Installation with rafter hooks (cont.) Fig. 4 90° Fig. 5 Maximum deviation from dimensions x and y 10 mm Continue with "Installing and connecting the collectors" (see page 21).

  • Page 8: Installation With Rafter Flange

    Installation with rafter flange For plain tiled and slate roofs Components Fig. 6 Rafter flange Mounting plate Seal Clamping bracket, external Screws Clamping bracket, internal Mounting rail Fitting the rafter flange and mounting rails A specific number of rafters is used for fitting. This number depends on the rafter spacing.
  • Page 9 Installation with rafter flange (cont.) Fig. 7 Fig. 8...

  • Page 10: Installation With Roof Hooks

    Installation with rafter flange (cont.) 90° Fig. 9 Maximum deviation from dimensions x and y 10 mm Continue with "Installing and connecting the collectors" (see page 21). Installation with roof hooks For pantiled, plain tiled, slate and corrugated sheet roofs...

  • Page 11: Components

    Installation with roof hooks (cont.) Components Fig. 10 Timber Zinc-plated countersunk chipboard screw (Spax-S) 38 x 58 x 2430/1570 mm 6 x 30 mm ■ 30 x 100 x 2430/1570 mm Roof hook for plain tiled roofs ■ Roof hook for pantiled roofs Roof hook for corrugated sheet profiles 5 and 6 Zinc-plated countersunk chipboard screw (Spax-S) Roof hook for corrugated sheet profile 8...
  • Page 12 Installation with roof hooks (cont.) Example: plain tiled roof Fig. 12 Roof cover y in mm Slate Plain tiles Corrugated sheets Tiled roof cover 30x100 38x58 Fig. 13 Continue with "Fitting the mounting rails" on page 14.
  • Page 13 Installation with roof hooks (cont.) Slate roof Note Fit commercially available lead flashing to protect against the ingress of moisture. Continue with "Fitting the mounting rails" on page 14. Fig. 14 Plain tiled roof Fig. 16 Note Trim tile; cut off approx. 30 mm with an angle grinder. Continue with "Fitting the mounting rails"...

  • Page 14: Fitting The Mounting Rails

    Installation with roof hooks (cont.) Fitting the mounting rails Fig. 18 Maximum deviation from dimensions x and y 10 mm Continue with "Installing the collectors" on page 21. Installation with mounting brackets For sheet metal roofs Components Fig. 19 Mounting bracket Clamping bracket, external Mounting plate Clamping bracket, internal...

  • Page 15: Fitting The Mounting Bracket And Mounting Rails

    Installation with mounting brackets (cont.) Fitting the mounting bracket and mounting rails Fig. 20 Use on-site fixings to secure the mounting brack- ets. The installation of the mounting brackets is shown using box profiles as an example. Fig. 21 Screws to be supplied on site.

  • Page 16: Installation With Rafter Anchors

    Installation with mounting brackets (cont.) Fig. 22 Maximum deviation from dimensions x and y 10 mm Installation with rafter anchors For tiled roof cover Components Fig. 23 Rafter anchor Clamping bracket, external Mounting rail Seal Mounting plate...

  • Page 17: Fitting The Rafter Hooks And Mounting Rails

    Installation with rafter anchors (cont.) Clamping bracket, internal Plastic replacement tile, if the existing tiles are not to be cut. Use only on roofs with a pitch of at least 12°. Fitting the rafter hooks and mounting rails A specific number of rafters is used for fitting. This number depends on the rafter spacing and expected snow loads.
  • Page 18 Installation with rafter anchors (cont.) Fig. 24 Rafter Batten Installation with tile trimming Fig. 25...
  • Page 19 Installation with rafter anchors (cont.) Fig. 27 Continue with step 9 (see page 21) Fig. 26 Installation with plastic replacement tiles Fig. 28...
  • Page 20 Installation with rafter anchors (cont.) Fig. 29 Fig. 30...

  • Page 21: Installing And Connecting The Collectors

    Installation with rafter anchors (cont.) 90° Fig. 31 Maximum deviation from dimensions x and y 10 mm Installing and connecting the collectors Please note The connection pipes must not show any signs of damage. Lubricate O-ring seals only with the special valve grease provided.
  • Page 22 Installing and connecting the collectors (cont.) 90° 90° Fig. 32 Fig. 33 Flow connection with sensor well for collector tem- perature sensor Return connection...

  • Page 23: Fitting The Collector Temperature Sensor

    Installing and connecting the collectors (cont.) 90° Fig. 34 Type plate Fitting the collector temperature sensor The collector temperature sensor is part of the stand- ard delivery of the collector connection set. Fig. 35 Fig. 36...

  • Page 24: Commissioning

    (cont.) Fig. 37 Fig. 38 Commissioning Service instructions "Vitosol 200-F", "type SVK and SVKA" Viessmann Werke GmbH&Co KG Viessmann Limited D-35107 Allendorf Hortonwood 30, Telford Telephone: +49 6452 70-0 Shropshire, TF1 7YP, GB Fax: +49 6452 70-2780 Telephone: +44 1952 675000 www.viessmann.com...

This manual is also suitable for:

Svk

Table of Contents