Axis Camera Station S9002 Mk II User Manual page 27

Desktop terminal
Hide thumbs Also See for Camera Station S9002 Mk II:
Table of Contents

Advertisement

AXIS Camera Station S9002 Mk II Desktop Terminal
Product overview
Power indicators
LED
Green
Blinking amber
Not illuminated
Blinking green
Hard drive indicators
CAUTION
• If two PSUs are installed, both the PSUs must
have the same type of label. For example,
Extended Power Performance (EPP) label. Mixing
PSUs from previous generations of PowerEdge
servers is not supported, even if the PSUs have
the same power rating. This results in a PSU
mismatch condition or failure to turn the system
on.
• When correcting a PSU mismatch, replace only
the PSU with the blinking indicator. Swapping
the PSU to make a matched pair can result
in an error condition and unexpected system
shutdown. To change from a high output
configuration to a low output configuration or
vice versa, you must turn off the system.
• AC PSUs support both 240 V and 120 V input
voltages with the exception of Titanium PSUs,
which support only 240 V. When two identical
PSUs receive different input voltages, they
can output different wattages, and trigger a
mismatch.
• If two PSUs are used, they must be of the same
type and have the same maximum output power.
• Combining AC and DC PSUs is not supported and
triggers a mismatch.
Description
A valid power source is connected to the PSU and the
PSU is operational.
Indicates a problem with the PSU.
Power is not connected.
When hot-plugging a PSU, the PSU indicator blinks green.
This indicates that there is a PSU mismatch with respect to
efficiency, feature set, health status, or supported voltage.
CAUTION
• When correcting a PSU mismatch, replace only
the PSU with the blinking indicator. Swapping
the PSU to make a matched pair can result
in an error condition and unexpected system
shutdown. To change from a High Output
configuration to a Low Output configuration or
vice versa, you must turn off the system.
• If two PSUs are used, they must be of the same
type and have the same maximum output power.
• Combining AC and DC PSUs is not supported
and triggers a mismatch.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9002 mk ii

Table of Contents