Axis Camera Station S9002 Mk II User Manual page 12

AXIS Camera Station S9002 Mk II Desktop Terminal
Configure your device
Start AXIS Camera Station
AXIS Camera Station Service Control automatically starts after the installation is complete.
Double-click the AXIS Camera Station Client icon to start the AXIS Camera Station client. When starting the client for the first time,
it automatically attempts to log in to the AXIS Camera Station server installed on the same computer as the client.
You can connect to multiple AXIS Camera Station servers in different ways.
Add devices
The first time you start your AXIS Camera Station, you are navigated to the Add devices page. AXIS Camera Station automatically
searches the network for connected devices and displays a list of devices found.
1. Select the cameras to add from the list.
If your camera is not listed, click Manual search.
2. Click Add.
3. Select Quick configuration or Site Designer configuration. Click Next.
4. Use the default settings and ensure the recording method is set to None. Click Install.
Configure recording method
1. Go to Configuration > Recording and events > Recording method.
2. If you want to enable motion detection recording:
2.1 Select a camera.
2.2 Turn on Motion detection.
2.3 Click Apply.
3. If you want to enable continuous recording:
3.1 Select a camera.
3.2 Turn on Continuous.
3.3 Click Apply.
Live view cameras
1. Click the Live view tab to navigate to the camera live view.
2. Click a camera to navigate to the live view of that camera.
A blue dot after the camera name shows that continuous recording is in progress. A red dot after the camera name shows
that motion detection recording is in progress.
3. Click to navigate from Live view to Recordings.
A red line in the timeline shows that motion detection recording has been taken for that period. A blue line in the
timeline shows that continuous recording is in progress.
Playback recordings
1. Go to the Recording tab.
2. In the timeline of the camera, use the mouse wheel to zoom in and out and drag the timeline to make the marker
pointing at your desired position.
12