Axis D4100-E User Manual
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security System
  5. D4100-E
  6. User manual

Axis D4100-E User Manual

Network strobe siren
Hide thumbs Also See for D4100-E:
Table of Contents

Advertisement

Quick Links

AXIS D4100-E Network Strobe Siren
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Axis D4100-E

Summary of Contents for Axis D4100-E

  • Page 1 AXIS D4100-E Network Strobe Siren User Manual...

  • Page 2: Table Of Contents

    AXIS D4100-E Network Strobe Siren Table of Contents Installation ..........

  • Page 3: Installation

    AXIS D4100-E Network Strobe Siren Installation Installation To watch this video, go to the web version of this document. www.axis.com/products/online-manual/62021#t10168836...

  • Page 4: Get Started

    Flashing or flickering lights can trigger seizures in persons with photosensitive epilepsy. Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.

  • Page 5: Webpage Overview

    AXIS D4100-E Network Strobe Siren Get started The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they may be used in various types of installations. To protect your data we strongly recommend that you: •...

  • Page 6: Configure Your Device

    AXIS D4100-E Network Strobe Siren Configure your device Configure your device Turn off maintenance mode after installing the siren CAUTION To protect the installer from hearing damage and from dazzling by bright light, it’s recommended to have maintenance mode on when installing the device.

  • Page 7: Set Up Rules For Events

    AXIS D4100-E Network Strobe Siren Configure your device 2. Click Export. 3. Browse to locate the .json files. Set up rules for events To learn more, check out our guide Get started with rules for events. Trigger an action 1. Go to System > Events and add a rule. The rule defines when the device will perform certain actions. You can set up rules as scheduled, recurring, or manually triggered.
  • Page 8 Create a new user with the role Operator or Administrator in the strobe siren. • Create a profile in the strobe siren. • Set up AXIS Motion Guard in the camera and create a profile called “Profile A”. Create two recipients in the camera...
  • Page 9 AXIS D4100-E Network Strobe Siren Configure your device 1. In the camera’s device interface, go to System > Events > Recipients and add a recipient. 2. Enter the following information: Name: Activate virtual port Type: HTTP URL: http://<IPaddress>/axis-cgi/virtualinput/activate.cgi Replace <IPaddress> with the address of the strobe siren.
  • Page 10 Activate strobe siren over MQTT when camera detects motion This example explains how connect a camera to the strobe siren over MQTT, and activate a profile in the strobe siren whenever the application AXIS Motion Guard, installed in the camera, detects motion. Prerequisites •...
  • Page 11 AXIS D4100-E Network Strobe Siren Configure your device 4. Add another rule with the following information: Name: No motion Condition: Applications > Motion alarm Select Invert this condition. Action: MQTT > Send MQTT publish message Topic: Motion Payload: Off QoS: 0, 1 or 2 5.

  • Page 12: The Device Interface

    AXIS D4100-E Network Strobe Siren The device interface The device interface Show or hide the main menu. Access the product help. Change the language. Set light theme or dark theme. See information about the user who is logged in. The context menu contains: •...

  • Page 13: Profiles

    AXIS D4100-E Network Strobe Siren The device interface Maintenance mode: Turn on to pause the ordinary light and siren activities during maintenance of the device. When maintenance mode is turned on, a pulsating light pattern is played and the siren is silent. To protect the installer from hearing damage and from dazzling by bright light, the siren makes no sound and the light gives white pulsating light in a triangle.

  • Page 14: Apps

    • Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device doesn’t have internet access. If you don’t have a license key, go to axis.com/applications. You need a license code and the Axis product serial number to generate a license key.
  • Page 15 AXIS D4100-E Network Strobe Siren The device interface IPv4 • Automatic IP (DHCP) and DNS (DHCP): The recommended setting for most networks. The current settings are updated automatically. • Automatic IP (DHCP) and manual DNS: Contact your network administrator to configure the manual settings. The current automatic settings are updated automatically.
  • Page 16 Authentication failed: Sends a trap message when an authentication attempt fails. Note All Axis Video MIB traps are enabled when you turn on SNMP v1 and v2c traps. For more information, see AXIS OS Portal > SNMP. • v3: SNMP v3 is a more secure version, which provides encryption and secure passwords. To use SNMP v3, we recommend you to activate HTTPS, as the password is then sent through HTTPS.
  • Page 17 AXIS D4100-E Network Strobe Siren The device interface Password for the account “initial”: Enter the SNMP password for the account named “initial”. Although the password can be sent without activating HTTPS, we don’t recommend it. The SNMP v3 password can only be set once, and preferably only when HTTPS is enabled.
  • Page 18 To install test firmware or other custom firmware from Axis on the device, you need a custom-signed firmware certificate. The certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific device which is identified by its unique serial number and chip ID.
  • Page 19 AXIS D4100-E Network Strobe Siren The device interface Users Add user: Click to add a new user. You can add up to 100 users. Username: Enter a unique username. New password: Enter a password for the user. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example letters, numbers, punctuation, and some symbols.
  • Page 20 AXIS D4100-E Network Strobe Siren The device interface Add a condition: Click to add an additional condition. Action: Select an action from the list and enter its required information. For information about specific actions, see Get started with rules for events.
  • Page 21 AXIS D4100-E Network Strobe Siren The device interface • SFTP Host: Enter the server's IP address or hostname. If you enter a hostname, make sure that a DNS server is specified under System > Network > IPv4 and IPv6. Port: Enter the port number used by the SFTP server. The default is 22.
  • Page 22 IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint and minimal network bandwidth. The MQTT client in Axis device firmware can simplify integration of data and events produced in the device to systems which are not video management systems (VMS).
  • Page 23 AXIS D4100-E Network Strobe Siren The device interface QoS: Change the QoS layer for the packet flow. Last Will and Testament message The Last Will Testament (LWT) lets a client provide a testament along with its credentials when connecting to the broker. If the client disconnects ungracefully at some point later (maybe because his power source died), it can let the broker deliver a message to other clients.
  • Page 24 AXIS D4100-E Network Strobe Siren The device interface Session Initiation Protocol (SIP) is used for interactive communication sessions between users. The sessions can include audio and video. Enable SIP: Check this option to make it possible to initiate and receive SIP calls.
  • Page 25 AXIS D4100-E Network Strobe Siren The device interface SIP accounts All current SIP accounts are listed under SIP accounts. For registered accounts, the colored circle lets you know the status. The account is successfully registered with the SIP server. There is a problem with the account. Possible reasons can be authorization failure, that the account credentials are wrong, or that the SIP server can’t find the account.
  • Page 26 AXIS D4100-E Network Strobe Siren The device interface Description: Enter a description of the action to be triggered. SIP test call SIP account: Select which account to make the test call from. SIP address: Enter a SIP address and click to make a test call and verify that the account works.

  • Page 27: Maintenance

    Severity: Select which messages to send when triggered. CA certificate set: See the current settings or add a certificate. Plain config Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from this page. Maintenance Restart: Restart the device.
  • Page 28 Note All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Signed firmware, secure boot, and security of private keys” at axis.com.

  • Page 29: Specifications

    AXIS D4100-E Network Strobe Siren Specifications Specifications Product overview Network connector PoE Status LED indicator I/O connector Control button White LEDs RGBA (red, blue, green, amber) LEDs Siren Light direction A Light direction B 10 Light direction C 11 Light direction D...

  • Page 30: Connectors

    AXIS D4100-E Network Strobe Siren Specifications Connectors Network connector RJ45 Ethernet connector with Power over Ethernet (PoE). I/O connector Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window contacts, and glass break detectors.

  • Page 31: Light Pattern Names

    AXIS D4100-E Network Strobe Siren Specifications Light pattern names Steady Steady white + flash color Alternate Pulse Escalate 3 steps Blink 3x Blink 4x Blink 3x fade Blink 4x fade Flash 1x Flash 3x Flash 1x white + steady color...
  • Page 32 Notification: Done Notification: Entry Notification: Failed Notification: Hurry Notification: Message Notification: Next Notification: Open Siren: Alternate Siren: Bouncy Siren: Evac Siren: Falling pitch Siren: Home soft Wall mounted at a distance of 1 meter on axis at volume setting 5.

  • Page 33: Cleaning Recommendations

    AXIS D4100-E Network Strobe Siren Cleaning recommendations Cleaning recommendations If the device gets grease stains or becomes heavily soiled, you can clean it with mild, solvent-free soap or detergent. NOTICE TICE TICE Never use harsh detergent, for example gasoline, benzene, or acetone.

  • Page 34: Troubleshooting

    Using firmware from the active track is recommended if you want to access the newest features, or if you use Axis end-to-end system offerings. The LTS tracks are recommended if you use third-party integrations, which are not continuously validated against the latest active track.

  • Page 35: Technical Issues, Clues, And Solutions

    Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the...

  • Page 36: Performance Considerations

    To access the device externally, we recommend you to use one of the following applications for Windows • AXIS Companion: free of charge, ideal for small systems with basic surveillance needs. • AXIS Camera Station: 30-day trial version free of charge, ideal for small to mid-size systems. For instructions and download, go to axis.com/vms.
  • Page 37 User Manual Ver. M2.2 AXIS D4100-E Network Strobe Siren Date: February 2022 © Axis Communications AB, 2022 Part No. T10166226...

Table of Contents