Specifications - Axis Camera Station S9002 Mk II User Manual

AXIS Camera Station S9002 Mk II Desktop Terminal
Product overview
7
Ethernet (RJ45) 1 GbE
8
Mini DisplayPort™
9
Power connector
10 System power LED
11 On/off button
12 Drive activity LED
13 Universal audio jack
14 USB 2.0
15 USB 2.0
16 USB 3.1
17 USB 3.1 Type-C

Specifications

System health and ID indicators
LED
Blue solid
Blue blinking
Amber solid
Amber blinking
IDRAC quick sync 2 indicator
LED
Off (default state)
White solid
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly
and then turns off
Amber solid
Amber blinking
NIC indicators
Description
The system is turned on, system is
healthy and system ID mode is not
active.
The system ID mode is active.
The system is in fail-safe mode.
The system is experiencing a fault.
Description Action
The iDRAC Quick Sync 2 Press the iDRAC Quick Sync 2 button to turn on the iDRAC Quick
feature is turned off. Sync 2 feature.
If the LED fails to turn on, reset the left control panel flex cable and
check again.
The iDRAC Quick Press the iDRAC Quick Sync 2 button to turn off.
Sync 2 is ready to
If the LED fails to turn off, restart the system.
communicate.
-
Data transfer activity
-
Firmware update is in
progress.
The iDRAC Quick Sync 2 Check if iDRAC Quick Sync 2 feature is configured to be disabled by
feature is disabled. iDRAC.
The system is in fail-safe Restart the system.
mode.
Restart the system.
The iDRAC Quick Sync
2 hardware is not
responding properly.
25
Action
Press the system health and system ID
button to switch to system ID mode.
Press the system health and system
ID button to switch to system health
mode.
-
Check the system event log for the
specific error message.