6 channel photo-mos relay output and 6 channel digital input data acquisition module (8 pages)
Summary of Contents for ICP DAS USA ET-2200 Series
Page 1
Mar. 2018 What’s in the box? The package includes the following items: ET-2268 Module x 1 Quick Start x1 (This Document) Related Information ET-2200 Series Product Page: Documentation & Firmware: NS-205/MDR-20-24 Product Page (optional): Technical support: service@icpdas.com...
Page 2
Connecting the Power and Host PC Make sure your PC has workable network settings. Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “Search Servers” on Chapter 5 may not work. (Please contact with your system Administrator) Connect both the ET-2268 and your PC to the same sub network or the same Ethernet switch.
Page 3
Pin Assignments & Wiring Note Pin Assignments: Wire Connections: Relay Output Readback as 1 Readback as 0 Form A Relay Load Load in NO1, NO3, AC/DC AC/DC NO5, NO7 COMx COMx Load1 Load1 Form C Relay in NO0, NO2, AC/DC COMx AC/DC...
Page 4
Wiring the DI and DO for Self-test A tip for connecting the wire to the connector A tip for removing the wire from the connector 1) Connect the External Power +24V to the NO0 pin (Pin01). 2) Connect the External Power GND to the COM0 pin (Pin03). NO0 01 COM0 03 Technical support:...
Modbus Address The nDO parameters in the following Modbus Address Tables are as follows: Mode Universal Number of DO channels Number of DI channels Name (nDO) (nDI) ET-2268 (0xxxx) DO address: Bits Begin Access Points Description Range address Type Point 0 (0x0) 1~nDO...
Configuring Network Settings 1) Run the eSearch Utility. The eSearch Utility is located at: http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/ 2) Click the “Search Servers” to search your ET-2268. 3) Double-click your ET-2268 to configure the settings Factory Default Settings of ET-2268: IP Address 192.168.255.1 Subnet Mask...
Page 7
Testing your Ethernet I/O Module 1) Wait 2 seconds and click “Search Servers” button again to ensure the ET-2268 is working well with new configuration. 2) Click the name of ET-2268 to select it. 3) Click the “Web” button to log in to the web configuration pages. (Or enter the URL address of the ET-2268 in the address bar of the browser.) ...
Page 8
5) In the “Home” page allows a simple test to be performed to verify the Digital Input and Output functionality. 6) In the “Digital I/O” section, click the “DO0” button to ON (Red). 7) Verify that the output LED status for “high”. 亮起...