12.Sept.2007 1. INTRODUCTION The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to service NOKIA products. This Service Manual must be used only by authorized NOKIA service suppliers. The content of it is confidential.
Page 7
CMO Operations & Logistics Training and Vendor Development Multimedia Creation & Support COMPANY CONFIDENTIAL 12.Sept.2007 SS-51 Camera Removal Tool for CMOS Camera ( N70 only) SS-34 Flex Opening Tool RJ-94 Soldering Jig Lead-free Solder Wire Mandatory for lead-free products (Level 2 only).
Page 10
10.) Remove the Power Button with tweezers. Chassis Assy. Additional force may be required while opening the Antenna Cover clips. 12.) Remove the Camera gasket (N70 only). 11.) Protect the Camera Rear Bezel Assy with a plastic film before turning the unit.