Call Diverting; Call Barring; Network - Nokia N72 User Manual

Call diverting

Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
1
Press , and select Tools
2
Select which calls you want to divert:
calls, or Fax calls.
3
Select the desired divert option. To divert voice calls
when your number is busy or when you reject incoming
calls, select If busy.
4
Set the divert option on (Activate) or off (Cancel), or
check whether the option is activated
Several divert options can be active at the same time.
When all calls are diverted,
standby mode.
Call barring and call diverting cannot be active at the
same time.

Call barring

Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider. Select the desired barring option, and set
> Settings > Call divert.
Voice calls, Data
(Check status).
is shown in the
Copyright © 2006 Nokia. All rights reserved.
it on (Activate) or off (Cancel), or check whether the
option is active (Check status).
calls, including data calls.
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to certain
official emergency numbers.

Network

Your device uses the GSM network. The GSM network is
indicated with in the standby mode.
Operator selection—Select
to search for and select one of the available networks,
or Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Call barring affects all
Automatic to set the device
93