Write Text; Traditional Text Input; Predictive Text Input-Dictionary - Nokia N72 User Manual

Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select
broadcast. In the main view you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.

Write text

Traditional text input

, , and
mode. indicates number mode.
is displayed when you are writing text using
traditional text input.
• Press a number key (
desired character appears. There are more characters
available for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold .
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
42
Options > Cell
indicate the selected character
— ) repeatedly until the
Copyright © 2006 Nokia. All rights reserved.
• To erase a character, press
clear more than one character.
• The most common punctuation marks are available
under . Press repeatedly to reach the desired
punctuation mark.
Press to open a list of special characters. Use
to move through the list, and select a character.
• To insert a space, press
next line, press three times.
• To switch between the different character modes,
press .
Predictive text input—Dictionary
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes full,
the latest added word replaces the oldest.
1
To activate predictive text
input, press , and
select Dictionary on. This
activates predictive text
input for all editors in the
device. is displayed
when you write text using
predictive text input.
2
To write the desired word,
press the keys —
. Press and hold
. To move the cursor to the
.
to