Useful Functions In Digital Mode; Using Preset Channels - Yaesu FT5DR Instruction Manual

Useful functions in digital mode

Using preset channels

Programming (presetting) a channel frequency allows you to easily connect to a local
node.
By sharing a channel frequency with other nodes, you can connect the transceiver to a
local node even while you are out. This is useful for a group to operate a station.
z Presetting a channel
1
Press and hold the [F
2
Touch [WIRES-X].
Displays the menu list.
3
Touch [1 RPT/WIRES FREQ].
4
Rotate the DIAL to select [PRESET].
Tips • Every time the DIAL is rotated, the setting switches
between [MANUAL] and [PRESET].
• The default setting is MANUAL.
5
Press the [F
MENU
6
Rotate the DIAL to select the frequency.
Tips • Touching [BAND] the preset frequency band.
7
Press the PTT.
Sets the frequency and returns the screen to the
frequency display screen.
z Connecting to a preset channel
1
Follow the procedure in "Presetting a channel" on page 14 to make the preset
channel available in advance.
2
Press and hold the [GM/X] key.
[ P ] flashes on the left side of the frequency display.
] key.
MENU
] key.
14
1 RPT/WIRES FREQ
PRESET
: 146.550 MHz
PUSH "F MENU"
1 RPT/WIRES FREQ
PRESET
: 146.550 MHz