Connecting To Registered Nodes Or Rooms - Yaesu FT5DR Instruction Manual

When a local node is found, [ X ] lights up, and the
node name and city name appear on the bottom part
of the screen.
Tip When any local node cannot be found,
seconds.
Tip
If the frequency of the detected local node is different from that of the preset channel, the frequency
automatically switches to the node frequency.
z Ending searching by a preset channel
1
Follow steps 1 to 3 in "Presetting a channel" on page 14 to display the selection
items of [1 RPT/WIRES FREQ].
2
Rotate the DIAL to display [MANUAL].
Tip Every time the DIAL is rotated, the setting switches between [MANUAL] and [PRESET].
3
Press the PTT.
Returns the screen to the frequency display screen.

Connecting to registered nodes or rooms

You can register names of nodes and rooms on the Internet and sort them into 5 categories.
Up to a total of 20 nodes and rooms can be registered in each category.
z Registering category names
1
Press and hold the [F
2
Touch [WIRES-X].
Displays the menu list.
3
Touch [3 EDIT CATEGORY TAG].
Displays the category name setting screen.
4
Rotate the DIAL knob to select one of [C1] to [C5],
then press the [F
Displays the character input screen.
5
Enter the category name.
The characters you have just entered appear on the screen.
6
Press the [BACK] key.
Returns the screen to the list.
Tip Repeat steps 3 to 6 to set more category names.
7
Press the PTT.
Sets the category name and returns the screen to the frequency display screen.
] key.
MENU
] key.
MENU
[
P ] disappears in 30
15
JQ1YBG-ND1 Shinagawa-
SEARCH & DIRECT
3 EDIT CATEGORY TAG
C1 ----------------
C2 ----------------
C3 ----------------
C4 ----------------
C5 ----------------