Table of Contents
Advertisement
Aligning the side of the
appliance door
If the appliance door is not in line with
the side walls of the appliance, the
appliance door can be aligned by
adjusting the upper hinge bracket.
Remove cover from the inside of
the hinge bracket and push it out.
Swing the cover downwards.
Changing the door hinging
Loosen the three screws on the hinge
bracket and adjust the hinge bracket
to the left or right.
Tighten the screws again.
Refit the cover.
Close the appliance door and check
that it is aligned with the side walls.
67
Advertisement
Table of Contents
