Changing the door hinging
Remove screw .
Pull out soft-close mechanism and
remove.
Push spacer to the side of the
appliance and remove.
Rotate spacer through 180° and
refit it on the opposite side. Push the
spacer along as far as it will go.
Rotate soft-close mechanism
through 180°. Attach the soft-close
mechanism onto the outside first.
Secure spacer to soft-close
mechanism with screw .
Caution.
Danger of injury.
Do not move the front part of the
soft-close mechanism in the
direction shown once safety
device has been removed.
60
Remove red safety device from the
soft-close mechanism.
Refit cover onto the soft-close
mechanism.
Put red safety device back onto
the soft-close mechanism.
Secure cover with screws .