Table of Contents
Advertisement
[PGM OUTPUT]
These items can be set only when the PGM option is used.
Item
[PGM OUTPUT SELECT]
[PGM OUTPUT LEVEL]
[LEVEL/PGM1/PGM2 VR SETTING]
Item
[INTERCOM1 PGM1 VR]
[INTERCOM1 PGM2 VR]
[INTERCOM2 PGM1 VR]
[INTERCOM2 PGM2 VR]
[VR MIN MODE]
[B/U INTERCOM LEVEL]
[OPT INTERCOM INPUT SETTING]
Item
[OPT ENG INPUT LEVEL]
[OPT PROD INPUT LEVEL]
[OPT PGM1 INPUT LEVEL]
[OPT PGM2 INPUT LEVEL]
[MIC SETTING]
Item
[MIC1 GAIN]
[MIC1 LINE INPUT LEVEL]
[MIC1 AMP]
[MIC2 GAIN]
[MIC2 LINE INPUT LEVEL]
Chapter 4 Menu Operations — Menu list
Sets the audio output from the <PGM OUT> terminal.
[PGM1], [PGM2], [PGM1/PGM2], [ENG], [PROD], [ENG/PROD], [CRANE]
f Factory setting: [PGM1]
Sets the output level from the <PGM OUT> terminal.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM1>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com
option: [CLEAR COM])
f Factory setting: [PGM1]
Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM1>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM2] (for Clear-Com
option: [CLEAR COM])
f Factory setting: [PGM2]
Sets the audio signal to be controlled by the <PGM1> dial of <INTERCOM2>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]
f Factory setting: [PGM1]
Sets the audio signal to be controlled by the <PGM2> dial of <INTERCOM2>.
[ENG], [PROD], [ENG/PROD], [PGM1], [PGM2], [PGM1/PGM2], [CRANE], [INCOM1]
f Factory setting: [PGM2]
Sets the level when the volume level is minimum.
[MUTE]: Muted
[MIN GAIN]: Minimum level
f Factory setting: [MUTE]
Sets the audio signal to be controlled by the intercom level of the Build-up Unit.
[OFF], [INCOM1], [INCOM2] (for Clear-Com option: [CLEAR COM]), [INCOM1/INCOM2] (for Clear-
Com option: [INCOM1/CLEAR COM])
f Factory setting: [OFF]
Sets the input level of the ENG audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PROD audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PGM1 audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PGM2 audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the gain when there is a microphone input to the <MIC 1> terminal.
[60dB], [40dB], [20dB]
f Factory setting: [60dB]
Sets the input level when there is a line input to the <MIC 1> terminal.
[0dB], [+4dB]
f Factory setting: [0dB]
Adjusts the level of the input to the <MIC 1> terminal.
[−20dB]...[+20dB]
f Factory setting: [0dB]
Sets the gain when there is a microphone input to the <MIC 2> terminal.
[60dB], [40dB], [20dB]
f Factory setting: [60dB]
Sets the input level when there is a line input to the <MIC 2> terminal.
[0dB], [+4dB]
f Factory setting: [0dB]
– 54 –
Description of settings
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
