Table of Contents
Advertisement
Item
[VR MIN MODE]
[B/U INTERCOM LEVEL]
[OPT INTERCOM INPUT SETTING]
Item
[OPT ENG INPUT LEVEL]
[OPT PROD INPUT LEVEL]
[OPT PGM1 INPUT LEVEL]
[OPT PGM2 INPUT LEVEL]
[MIC SETTING]
Item
[MIC1 GAIN]
[MIC1 LINE INPUT LEVEL]
[MIC1 AMP]
[MIC2 GAIN]
[MIC2 LINE INPUT LEVEL]
[MIC2 AMP]
[MIC2 INPUT SELECT]
[FRONT MIC POWER]
[PAINT]
[PAINT SWITCH]
Item
[BLACK SHADING]
[WHITE SHADING]
[FLARE]
[GAMMA]
Chapter 4 Menu Operations — Menu list
Sets the level when the volume level is minimum.
[MUTE]: Muted
[MIN GAIN]: Minimum level
f Factory setting: [MUTE]
Sets the audio signal to be controlled by the intercom level of the Build-up Unit.
[OFF], [INCOM1], [INCOM2] (for Clear-Com option: [CLEAR COM]), [INCOM1/INCOM2] (for Clear-
Com option: [INCOM1/CLEAR COM])
f Factory setting: [OFF]
Sets the input level of the ENG audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PROD audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PGM1 audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input level of the PGM2 audio signal sent from the CCU to the camera.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the gain when there is a microphone input to the <MIC 1> terminal.
[60dB], [40dB], [20dB]
f Factory setting: [60dB]
Sets the input level when there is a line input to the <MIC 1> terminal.
[0dB], [+4dB]
f Factory setting: [0dB]
Adjusts the level of the input to the <MIC 1> terminal.
[−20dB]...[+20dB]
f Factory setting: [0dB]
Sets the gain when there is a microphone input to the <MIC 2> terminal.
[60dB], [40dB], [20dB]
f Factory setting: [60dB]
Sets the input level when there is a line input to the <MIC 2> terminal.
[0dB], [+4dB]
f Factory setting: [0dB]
Adjusts the level of the input to the <MIC 2> terminal.
[−20dB]...[+20dB]
f Factory setting: [0dB]
Sets the input signal for the <MIC 2> terminal.
This item can be set only when the PGM option is used.
[FRONT MIC], [OFF]
f Factory setting: [OFF]
Enables/disables the phantom power (48 V) for the external microphone connected to the <MIC> terminal
(front).
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the black shading (saw-toothed waveform or parabolic waveform).
[OFF], [ON]
f Factory setting: [ON]
Enables/disables the white shading (saw-toothed waveform or parabolic waveform).
[OFF], [ON]
f Factory setting: [ON]
Enables/disables flare.
[OFF], [ON]
f Factory setting: [ON]
Enables/disables gamma.
[OFF], [ON]
f Factory setting: [ON]
– 54 –
Description of settings
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
