[Intercom Setting] - Panasonic AK-HC5000 Operating Instructions Manual

[INTERCOM SETTING]

[INTERCOM1]
Item
[INCOM1 TALK [MIC TYPE]
SETTING]
[MIC POWER]
[MIC GAIN]
[SIDE TONE]
[INCOM1 TO CCU]
[INCOM1 RECEIVE [OUTPUT GAIN]
SETTING]
[OUTPUT CH]
[INCOM1 RECEIVE CH1 [PGM1 MIX]
SETTING]
[PGM2 MIX]
[CRANE INCOM MIX]
[INCOM2 MIX]
([CLEAR COM MIX])
[INCOM1 RECEIVE CH2 [ENG MIX]
SETTING]
[PROD MIX]
[PGM1 MIX]
[PGM2 MIX]
[CRANE INCOM MIX]
[INCOM2 MIX]
([CLEAR COM MIX])
[INTERCOM2]
This item is not displayed when Clear-Com is connected.
Item
[INCOM2 TALK [MIC TYPE]
SETTING]
[MIC POWER]
Chapter 4 Menu Operations — Menu list
Selects the type of the intercom 1 microphone.
[DYN]: Dynamic type
[ECM]: Condenser type
[CBN]: Carbon type
f Factory setting: [DYN]
Sets the on/off for the power supply to the intercom 1 microphone.
[OFF], [ON]
f Factory setting: [OFF]
Sets the volume of the intercom 1 microphone.
[−12dB]...[12dB]
f Factory setting: [0dB]
Sets the volume of the intercom 1 microphone side tone.
[OFF], [−36dB]...[0dB] (3 dB step)
f Factory setting: [−6dB]
Sets whether to transmit the intercom 1 microphone audio to the CCU.
[OFF], [ON]
f Factory setting: [ON]
Sets the gain of the intercom 1 audio output.
[NORMAL], [BOOST]
f Factory setting: [NORMAL]
Sets the allocation of the intercom 1 audio output.
[CH1/CH2], [CH2/CH1]
f Factory setting: [CH1/CH2]
Sets whether to mix the PGM1 signal with the intercom 1 CH1 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with the intercom 1 CH1 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the crane intercom signal with the intercom 1 CH1 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the intercom 2 signal (CLEAR COM signal for the Clear-Com option) with the intercom
1 CH1 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the ENG signal with the intercom 1 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the PROD signal with the intercom 1 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the PGM1 signal with the intercom 1 CH2 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with the intercom 1 CH2 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the crane intercom signal with the intercom 1 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the intercom 2 signal (CLEAR COM signal for the Clear-Com option) with the intercom
1 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Selects the type of the intercom 2 microphone.
[DYN]: Dynamic type
[ECM]: Condenser type
[CBN]: Carbon type
f Factory setting: [DYN]
Sets the on/off for the power supply to the intercom 2 microphone.
[OFF], [ON]
f Factory setting: [OFF]
– 51 –
Description of settings
Description of settings