Table of Contents
Advertisement
Upper side
1
2
3
1
1 Viewfinder front/back positioning lever
To adjust the front/back position of the viewfinder, loosen this lever and slide the viewfinder forwards or backwards to adjust the viewfinder to a
position that enables easy viewing. After adjusting the viewfinder, turn the lever towards <LOCK> to lock the position.
2 Viewfinder left-right positioning ring
To adjust the left/right position of the viewfinder, loosen this lever and slide the viewfinder to the left or right to adjust the viewfinder to a position that
enables easy viewing. Tighten the lever to clamp the viewfinder in place after adjusting.
3 Light shoe
Used to mount a video light, etc.
4 Microphone holder holes
Used to mount a microphone.
5 <PTT> switch
Used to switch the intercom microphone on/off. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP
PTT].
6 <RET> switch
Used to switch to the return A signal. The function can be changed in [MAIN MENU] → [SWITCH MODE] → [USER SWITCH] → [GRIP RET].
7 Accessory mounting hole
Used to attach accessories. This hole is used only for the purpose of attaching accessories.
f Mounting hole size
- 1/4-20 UNC (screw length 13 mm or shorter)
8 Lock release button
Used to release the lock of the V-groove.
9 V-groove
Used to attach the rear viewfinder.
Chapter 2 Description of Parts — Upper side
4
5
6
7
– 25 –
9
8
Advertisement
Table of Contents
