Panasonic AK-HC5000 Operating Instructions Manual page 90

Item
[Model no.]
[MAC address]
[Firmware version]
[Viewer software installation counter]
[Default reset] tab
Initialize the setting data of the camera and restart the camera.
Item
[Reset to the default (Except the network settings)]
[Back up] tab
You can save network-related settings to a computer, or apply the settings saved in a computer to the camera.
Item
[Download]
[Upload]
r Saving the network-related settings of the camera to a computer ([Download])
Perform the following procedure to save the network-related settings of the camera to a computer.
Do not turn off the power of the camera while the download operation is in process.
Do not perform any operation from the start of the download operation until its end.
1
Click the [Execute] button for [Download].
A dialog box for saving destination appears.
2
Specify a saving destination folder, and then click the [OK] button.
The data will be saved.
r Applying the settings saved in a computer to the camera ([Upload])
Perform the following procedure to upload the setting file of the camera saved in a computer using the download function [Download] to apply the
settings to the camera.
Use the file downloaded with the camera when uploading data.
Do not change the extension (.ndt) of a downloaded file.
Do not turn off the power of the camera while the upload operation is in process.
Do not perform any operation from the start of the upload operation until its end.
1
Click the [Browse...] button on [Upload] to specify the downloaded software.
2
Click the [Execute] button.
A message dialog box appears.
Chapter 5 Web Screen — [Setup] screen
Displays the model number of the camera.
Displays the MAC address of the camera.
[CPU Software - CAM MAIN]: Displays the camera's main software version.
[CPU Software - NETWORK]: Displays the software version of the network component.
[EEPROM - ROM TABLE]: Displays the version of the camera table.
[FPGA - CAM FPGA]: Displays the camera's FPGA version.
[FPGA - AVIO FPGA]: Displays the FPGA version of the image processing component.
[FPGA - INCOM FPGA]: Displays the FPGA version of the power supply and audio control component.
Displays the number of plugin software for display that has been installed automatically from the camera.
By clicking the [Execute] button, resets the configuration of the camera to its default settings.
The user name and password used for login are also reset to their default values (admin/12345).
After executing the reset operation, the camera cannot be operated for approximately three minutes.
The following setting items will not be reset.
f All items for [IPv4 network]
f [HTTP port]
f [Line speed]
f [Bandwidth control (bitrate)]
Saves the network-related settings of the camera to a computer. (page 90)
Uploads the setting file of the camera saved in a computer using the download function. (page 90)
– 90 –
Description of settings
Description of settings
Description of settings