Panasonic AK-HC5000 Operating Instructions Manual page 52

Item
[MIC GAIN]
[SIDE TONE]
[INCOM2 TO CCU]
[INCOM2 RECEIVE [OUTPUT GAIN]
SETTING]
[OUTPUT CH]
[INCOM2 RECEIVE CH1 [PGM1 MIX]
SETTING]
[PGM2 MIX]
[CRANE INCOM MIX]
[INCOM1 MIX]
[INCOM2 RECEIVE CH2 [ENG MIX]
SETTING]
[PROD MIX]
[PGM1 MIX]
[PGM2 MIX]
[CRANE INCOM MIX]
[INCOM1 MIX]
[STANDBY INTERCOM]
Item
[STBY INCOM [INPUT LEVEL]
SETTING]
[OUTPUT LEVEL]
[CANCEL LEVEL]
[STBY INCOM ON/OFF]
[CRANE INTERCOM]
Item
[CRANE INCOM [INPUT LEVEL]
SETTING]
[OUTPUT LEVEL]
Chapter 4 Menu Operations — Menu list
Sets the volume of the intercom 2 microphone.
[−12dB]...[+12dB]
f Factory setting: [0dB]
Sets the volume of the intercom 2 microphone side tone.
[OFF], [−36dB]...[0dB]
f Factory setting: [−6dB]
Sets whether to transmit the intercom 2 microphone audio to the CCU.
[OFF], [ON]
f Factory setting: [ON]
Sets the gain of the intercom 2 audio output.
[NORMAL], [BOOST]
f Factory setting: [NORMAL]
Sets the allocation of the intercom 2 audio output.
[CH1/CH2], [CH2/CH1]
f Factory setting: [CH1/CH2]
Sets whether to mix the PGM1 signal with the intercom 2 CH1 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with the intercom 2 CH1 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the crane intercom signal with the intercom 2 CH1 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the intercom 1 signal with the intercom 2 CH1 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the ENG signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the PROD signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the PGM1 signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the PGM2 signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [ON]
Sets whether to mix the crane intercom signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets whether to mix the intercom 1 signal with the intercom 2 CH2 output.
[OFF], [ON]
f Factory setting: [OFF]
Sets the input signal level of the stand-by intercom.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the output signal level of the stand-by intercom.
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the input/output cancel signal level of the stand-by intercom.
[−20.0dB]...[+20.0dB] (0.5 dB step)
f Factory setting: [0.0dB]
Enables/disables the stand-by intercom.
[OFF], [ON]
f Factory setting: [ON]
Sets the input volume of the crane intercom (connected to the <EXT I/O> terminal).
[−36dB]...[+12dB]
f Factory setting: [0dB]
Sets the output volume of the crane intercom (connected to the <EXT I/O> terminal).
[−36dB]...[+12dB]
f Factory setting: [0dB]
– 52 –
Description of settings
Description of settings
Description of settings