Jp-3750 Printer - Samyung ENC SRG-150DN Instruction Manual

JP-3750 PRINTER

9-2
1) Normal operation
① Make sure that the power of the SRG-150DN / 250DN main unit connected to this
unit is turned on
② Turn on the POWER switch and turn on the power
③ It automatically enters the DSC MESSAGE and DATA of the transmission and
reception sent from the SRG-150DN / 250DN.
2) How to install and use ROLL paper
① Open the cover
② Put the ROLL paper holder in the holes on both sides of the printer
③ Insert the ROLL paper support cap into the socket on the back of the printer.
④ Move the handle lever toward the front side so that the column indicator comes off
the platen.
⑤ Position the paper release lever at the front position.
⑥ Put the paper rod on the ROLL paper core, and open the guide of the ROLL paper
support.
⑦ Insert the paper from the back of the platen over the paper barrel, and check that the
end of the paper lies on the end of the platen.
⑧ Lightly push the paper, close the paper release lever, and turn the platen handle so
that the paper is in front of the platen.
⑨ Close the handle lever.
⑩ Place the cover in place.
78