If you turn with the front channel dial, it will be converted into 100Hz unit. Press
put on RX and press
going to change and change the frequency from 10Hz to 10MHz with the dial.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press
[ Ref. ] In [RCV] mode TX frequency cannot be displayed.
AM MODE
5-3-3
➜
appears.
If you turn with the front channel dial, press
frequency
frequency from 10Hz to 10MHz with the dial.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press
, choose frequency
to switch to another mode.
➜ If you press
,
, to which you going to change and change the
to switch to another mode.
,
the following screen
, put on RX and press
,
, to which you
, choose
35