Samyung ENC SRG-150DN Instruction Manual page 37

[ Ref. ] In [AM] mode TX frequency cannot be displayed (only RX) and AGC is set
automatically.
DSC MODE
5-3-4
➜
screen appears.
If you turn with the front channel dial, press
frequency
frequency from 10Hz to 10MHz with the dial.
[ Ref. ] CH1 to CH32 have no frequency change, and applies CH33 ~ CH40.
[ Ref. ] It automatically returns when there is no signal for 5 seconds.
Press
36
➜
, , to which you going to change and change the
to switch to another mode.
➜ If you press
, put on RX and press
, the following
, choose