Samyung ENC SRG-150DN Instruction Manual page 74

[CENTER/RAD]
You should use numeric keys to input. If there is a position input, the area within 500NM is
automatically entered at the position of the ship.
4) When you select the DSC article, input the DSC frequency you want to call.
5) You can select [TELEPHONE]/[TELEX] in the article MODE
6) If you select COMM, you can input the communication frequency to be used and only
the input of the same band as the DSC calling frequency is possible. If you select in the
DSC item, the recommended frequency is automatically entered.
7) Press
frequency and the communication mode and will be able to communicate.
2187.5Khz
4207.5Khz
6312.0Khz
8414.5Khz
12577.0Khz
16804.5Khz
TELEPHONE
TELEX
to send the AREA call and change to the set communication
[CONER/DEV]
73