Transmitter Specifications - Samyung ENC SRG-150DN Instruction Manual

7) Dimensions (mm)
SRG-150DN / 250DN: 324 (W) X 170 (H) X 347 (D)
SN-100: 300 (W) X 255 (H) X 127 (D)
8) Weight
SRG-150DN / 250DN about 8.1Kg
SN-100
SAT-100

TRANSMITTER SPECIFICATIONS

3-2
1) Type of emission: J3E, FIB
2) Communication method: SIMPLEX and SEMI DUPLEX method
3) Frequency range: 1.605MHz ~ 27.499MHz, 10Hz STEP
However, TELEX frequency, which is linked with DSC, is not input.
4) Continuous operation: When using 200A battery
Operating for over 8hrs with transmitting for 1 minute, stand by for 4 minutes.
5) Antenna power:
Power reduction: 3 steps
6) Stability of frequency: less than ± 10Hz, SYNTHESIZER method (within 0.3ppm)
7) Number of channels: SSB x 299, ITU x 271, DSC x 19
8) Modulation method: Low power stage balanced modulation method
9) Occupied frequency bandwidth: J3E ... Within 3kHz,
10) Carrier attenuation ratio: more than 40dB (for J3E)
11) Spurious attenuation ratio: In J3E
12) Comprehensive frequency characteristics: deviation at 350 - 2,700Hz is within 6dB
about 5Kg
DIR 3.4Kg
SRG-150DN (J3E 50/100/150, F1B 75/100 / 100W)
SRG-250DN (J3E 50/100/250, F1B 75/100 / 150W)
F1B ... Within 0.5kHz
1.5 - 4.5kHz
4.5 - 7.5kHz
More than 7.5kHz
In F1B
More than 138Hz 15dB
More than 276Hz 31dB
More than 500Hz 43dB
more than 31dB
more than 38dB
more than 43dB
15