Adding Cards; Figure 2.2: Installing Add-On Cards - Advantech AWS-8248 User Manual

2.3 Adding cards

Remove the cover of the work drawer by either removing the 10 screws
that attach it or by sliding it out. Remove the screw that fixes the card
hold-down clamp, and remove the clamp.
Slowly slide the card in and carefully press it into the backplane socket.
Secure it by screwing it into the top mounting bar. (See Fig. 2-2.) Connect
the card wiring. Add any additional cards or take out cards you need to
service. Reattach the hold-down clamp. When you have finished, reattach
the cover.
AWS-8248 User's Manual

Figure 2.2: Installing add-on cards

12