Page 1
User Manual AIR-100 Signage AI Inference System...
Page 2
The documentation and the software included with this product are copyrighted 2019 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the right to improve the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
Page 3
Because of Advantech's high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out of warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 4
Technical Support and Assistance Visit the Advantech website at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
Page 5
Packing List Before installation, please ensure that the following items have been shipped: 1 x AIR-100 Unit 1 x accessory box include: – 1 x Power Adaptor – 1 x Bracket set for fixing power adapter plug –...
Page 6
This product is intended to be supplied by an UL certified power supply or dc source suitable for use at minimum Tma 50 degree C whose output meets SELV, LPS and is rated 19Vdc, 3.42A min., if need further assistance, please contact Advantech for fur- ther information.
Page 7
Remplacer uniquement avec un modèle recommandé par le fabricant, et éliminer les piles usagées selon les instructions du fabricant AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à CEI 60950-1 (ed.2). Advantech décline toute responsabilité quant à l'exactitude des déclarations contin- ues dans ce document. AIR-100 User Manual...
Page 8
50 degrés Celsius, dont la sortie est conforme aux normes SELV, LPS et d'une puissance nominale de 19 Vcc, 3,42A min. informations supplémentaires. Au moyen d'un cordon d'alimentation connecté à une prise de courant avec mise à la terre AIR-100 User Manual viii...
Introduction Advantech AIR-100 is a Edge AI Inference Systems of Ultra HD signage player. It is powered by an Intel® Atom™ Processor E3950, Intel Movidius Myriad X MA2485 VPU and integrated NVIDIA® GeForce® GT 1030 graphic engine to help accelerate deep learning inference on the edge for a wide range of AI-based vertical applica- tions.
Mechanical Specification 1.4.1 Dimension 220 x 150 x 40 mm (8.66" x 5.91" x 1.57") (W x D x H) 247.40 9.74 235.40 9.27 220 8.66 Figure 1.1 AIR-100 Mechanical Dimensions 1.4.2 Weight 1.7 kg (3.7 lb) AIR-100 User Manual...
Figure 2.2 Rear view AIR-100 Front External I/O Connectors 2.2.1 Power ON/OFF Button AIR-100 has a power ON/OFF button on front side. Push this button to turn the sys- tem ON and OFF. Figure 2.3 Power button AIR-100 User Manual...
2.2.3 USB Connectors AIR-100 front side provides 2 x USB3.0 interface connectors, which give complete Plug & Play and hot swapping capability for up to 127 external devices. The two USB 3.0 interface are compliant with USB UHCI, Rev. 3.0. (Refer to Table 2.2 for pin defi- nitions) Figure 2.5 USB connector...
Line out It supports Jacks sensing and configuration can be conducted via the driver UI. Figure 2.6 2.6 S/PDIF / Line out 2.2.5 Mic In The connector port have Microphone (Input) functions. Figure 2.7 Mic-in connector AIR-100 User Manual...
AIR-100 Rear External I/O Connectors 2.3.1 Power Input Connector AIR-100 comes with a DC-Jack header that takes 19 VDC external power input. Figure 2.8 DC input connector 2.3.2 HDMI Connector AIR-100 HDMI (High-Definition Multimedia Interface) connectors provide all-digital audio/video interface to transmit the uncompressed audio/video signals and are HDCP compliant.
2.3.3 USB Connectors AIR-100 rear side provides 2 x USB2.0 interface connectors, which give complete Plug & Play and hot swapping capability for up to 127 external devices. (Pin definition refer Table 2.4) Figure 2.10 USB 2.0 connector Table 2.4: USB Pin Assignments...
2.3.4 Ethernet Connector (LAN) AIR-100 provides one RJ45 LAN interface connectors,they are fully compliant with IEEE 802.3u 10/100/1000 Base-T standards. The Ethernet port provides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link sta- tus and speed status.
Loosening the 4 fixing screws ① on the top cover ② . Remove the top cover ② . Insert the memory module into memory socket ④⑤ . Assemble back the heatsink cover with the 4 screws. Figure 2.12 Memory module installation AIR-100 User Manual...
Loosening the 2 screws ② on the side view and move out the drive bay. Fixing the 4 screws ① with HDD/SSD and storage bracket. Insert the storage bracket into chassis. Fixing the screw back. Figure 2.13 HDD/SSD installation AIR-100 User Manual...
Mini PCIe card /SIM Card Installation Loosening the fixing screw ① on the bottom side. Insert the mini PCIe module /SIM card into the sockets and fix it with screws. Figure 2.14 Mini PCIe / SIM card installation AIR-100 User Manual...
Antenna Installation Loosening the 4 fixing screws ① on the side of top cover. Attach the antenna module to the ant holes ② of chassis. Assemble back the top cover with the screws. Figure 2.15 Antenna module installation AIR-100 User Manual...
2.4.5 Mount Brackets Installation Fixing the two mount brackets with 4 screws M3x5L ① directly. Figure 2.16 Mount brackets installation AIR-100 User Manual...
2.4.6 Rubber Feet Installation Retrieve the four rubber feet from the accessory box. Attach the rubber feet to the four corners and fixing them by four screws ① directly. Figure 2.17 Rubber feet Installation AIR-100 User Manual...
Using the AMI BIOS Setup program, users can modify the BIOS settings and control various system features. This chapter describes the basic navigation of the BIOS setup screens for the AIR-100 series. The AMI BIOS's ROM features a built-in setup program that allows users to modify the basic system configuration.
3.2.2 Advanced BIOS Setup Select the Advanced tab from the AIR-100 setup screen to enter the Advanced BIOS setup screen. Users can select any item in the left frame of the screen, such as CPU configuration, to access the sub menu for that item. Use the <Arrow> keys to scroll through the Advanced BIOS Setup options.
Page 34
Figure 3.3 ACPI setup screen SMART Settings System SMART Settings – SMART Self Test Run SMART Self test on all HDDs during POST Figure 3.4 SMART Setting screen AIR-100 User Manual...
Page 35
ITE8528E Super I/O Configuration System super I/O chip parameters Figure 3.5 Super I/O configuration setup screen ITE8528E HW Monitor Hardware status (PC health) monitoring Figure 3.6 Hardware monitoring screen AIR-100 User Manual...
Page 36
S5 RTC Wake Settings Enable the system to wake from S5 using a real-time clock (RTC) alarm Figure 3.7 S5 RTC wake setup screen Serial Port Console Redirection Figure 3.8 Serial port console redirection setup screen AIR-100 User Manual...
Page 37
CPU Configuration CPU configuration parameters Figure 3.9 CPU configuration setup screen PPM Configuration Enable/disable CPU C-state report to OS Figure 3.10 CPU C-state report setup screen AIR-100 User Manual...
Page 38
Allows users to set the USB mass storage device start unit command timeout time; options include 10, 20, 30, and 40 seconds. – Device Power-Up Delay Enable/disable Auto or Manual USB mass storage device start unit command timeout. AIR-100 User Manual...
Page 39
Figure 3.12 USB configuration setup screen Platform Trust Technology Figure 3.13 Platform Trust Technology AIR-100 User Manual...
3.2.3 BIOS Chipset Setup Select the Chipset tab in the AIR-100 BIOS Setup Utility to enter the BIOS Chipset setup screen. Users can select any item displayed in the left frame of the screen. North Bridge North Bridge parameters Memory Information ...
BIOS Security Setup Select the Security tab from the setup screen to enter the BIOS Security setup screen Administrator Password Set an administrator password User Password Set a user password Figure 3.16 Security configuration setup screen AIR-100 User Manual...
3.2.5 BIOS Boot Setup Select the Boot tab from the AIR-100 setup screen to enter the BIOS Boot setup screen. Users can select any item in the left frame of the screen. Figure 3.17 Boot configuration setup screen Setup Prompt Timeout ...
Restore the User Defaults to all setup options Boot Override – UEFI Built-in EFI Shell Launch EFI Shell From File System Device – Allows users to launch the EFI Shell application (Shell.efi) from an available file system device AIR-100 User Manual...
Need help?
Do you have a question about the AIR-100 and is the answer not in the manual?
Questions and answers