General Information; Technical Data; Characteristic Noise Values - Scheppach AB1600 Instruction Manual

Manufacturer:
Scheppach Australia Pty Ltd
Level 6
8 Spring Street
Sydney NSW 2000
Australia
Contact Details:
www.scheppach.com.au

1300 855 831

masterssupport@scheppach.com.au

Dear Customer,
We wish you much joy and success in working with your
new machine.
Note:
The manufacturer of this equipment shall be liable in ac-
cordance with the applicable product liability law for da-
mage caused to or by this device through:
• Improper handling,
• Noncompliance with the operating instructions,
• Repairs by third parties, unauthorised specialists,
• Installation and exchange of unoriginal spare parts,
• Unintended use,
• Failure of the electrical system due to non-compliance
with electrical requirements and Australian specifica-
tions.
We recommend:
Before using the demolition hammer, please read the in-
structions included in this manual carefully.
Read the operating instructions:
Read the operating manual carefully, before putting the
demolition hammer in operation or making any adjust-
ments to it.
Dangerous voltage
Caution! Turn off the power supply before making any
adjustments to the demolition hammer.
Risk of sudden start
Caution! The demolition hammer may restart suddenly
after a power failure.
Read the entire operating instructions before assembly
and getting started with the device.
This operation manual should help you to familiarise you
with your machine and use it for intended applications.
The operating manual includes important information, on
how to work safely, correctly and economically with the
machine and how to avoid hazards, save repair costs,
reduce downtimes and increase the reliability and ser-
vice life of the machine.
In addition to the safety regulations of this operating ma-
nual, you must follow the national provisions applicable
to the operation of the machine.
Keep the operating manual close to the machine, safely
in a plastic cover protected against dirt and moisture. It
must be read by every operator before starting work and
carefully followed.
4
Work at the machine may be done only by persons, who
are instructed on using the machine and the associated
hazards. The minimum age specified should be com-
plied with.
Besides the safety instructions included in this operating
manual and the special instructions of your country, the
generally accepted technical rules should be followed for
the operation.

General Information

• Check all parts for any transportation damage after
unpacking them. In case of complaints, the supplying
carrier must be notified immediately. Later claims will
not be accepted.
• Check the shipment for completeness.
• Familiarise yourself with the device before using it, by
referring to the operating manual.
• Use only originals parts for accessories, wear parts
and spare parts. You will receive spare parts from your
specialist dealer.
• Indicate our article numbers as well as type and model
of the device in your orders.

Technical Data

Delivery contents
Specifications
Blow count [1/min.]
Dimensions L x W x H
[mm]
Blowing force [Joule]
Vibration level [m/s2]
Weight [kg]
Drive
Motor V/Hz
Power consumption P1 W
Protection class
Type of Protection
Technical modifications subject to change!

Characteristic noise values

The noise at workplace may exceed 85 dB (A).
In this case noise protection measures are necessary for
the user. (Wear ear protection!)
Sound power level L = 105,0 db (A)
WA
Sound pressure level LPA = 83,0 dB (A)
Exposure to noise can cause hearing loss. Total vibration
values determined according to EN ISO 3744.
Chisel
Vibration emission value ah = 14.3 m/s²
Demolition Hammer
Point chisel ø 30 L410
Flat chisel ø 30 L410
Oil can
Wrench 13/23 mm
Allen key 5/6 mm
Spare carbon brushes
1500
250 x 120 x 960
50
14,3
20
230-240 V / 50 Hz
1600
B
IP20