Scheppach AB1600 Instruction Manual
  1. Manuals
  2. Brands
  3. Scheppach Manuals
  4. Power Hammer
  5. AB1600
  6. Instruction manual

Scheppach AB1600 Instruction Manual

Hide thumbs Also See for AB1600:
Table of Contents

Advertisement

Quick Links

Download this manual
Art.No.
5908201904
08/2015
AB1600
Demolition Hammer
AUS
Instruction manual

Advertisement

Table of Contents
loading

Related Manuals for Scheppach AB1600

Summary of Contents for Scheppach AB1600

  • Page 1 Art.No. 5908201904 08/2015 AB1600 Demolition Hammer Instruction manual...

  • Page 2: Explanation Of The Symbols On The Device

    Explanation of the symbols on the device WARNING - Read the operating instructions to reduce the risk of inquiry Wear safety goggles! Wear a dust mask! Wear safety ear muffs! Wear work gloves Wear safety footwear...
  • Page 3 180°...

  • Page 4: General Information

    Manufacturer: Work at the machine may be done only by persons, who Scheppach Australia Pty Ltd are instructed on using the machine and the associated Level 6 hazards. The minimum age specified should be com- 8 Spring Street plied with.

  • Page 5: General Power Tool Safety Warnings

    Note: The vibration value will change due to the field of f) lf operating a power tool in a damp location is application of the power tool and may exceed the speci- unavoidable, use a residual current device (RCD) fied value in exceptional cases. protected supply.

  • Page 6: Proper Use

    any other condition that may affect the power manufacturer as well as the dimensions indicated in tool‘s operation. lf damaged, have the power tool the technical data must be followed. repaired before use. Many accidents are caused by • The relevant accident prevention regulations and poorly maintained power tools.

  • Page 7: Operation

    Operation / Work Instructions ter pipes using a pipe locator. Caution! For your safety, the machine must be held only at the two handles (3 and 4, Figure 1)! Operation This will avoid the danger of an electric shock through Use only proper equipment.

  • Page 8: Maintenance

    a) do not exceed a maximum permitted supply impe- Place the device with the tool holder in the down position dance “Z”, or on the floor. The oil must be at least 4 mm above the bot- b) have a continuous current-carrying capacity of the tom edge of the sight glass.
  • Page 12 Scheppach Australia Pty Ltd Level 6 8 Spring Street Sydney NSW 2000 Australia...

This manual is also suitable for:

5908201904

Table of Contents