Adjustment; Steering Friction; Throttle Grip Friction; Remote Control Lever Friction - TOHATSU M 40D2 Owner's Manual

62

ADJUSTMENT

ENOM00073-C

1. Steering friction

Tiller handle type
ENOW00074-D
Do not over tighten the steering friction
adjustment bolt it could result in difficulty of
movement resulting in the loss of control
causing an accident and could lead to severe
injury.
ENON00506-B
Note
The steering friction adjustment bolt is
used to adjust the friction load of the
steering, but not to fix the steering. Excess
tightening of the adjustment bolt may
cause damage to the swivel bracket.
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
bolt.
9
3
2
1. Steering friction adjustment bolt
2. Lighter
3. Heavier
WARNING
1
ENOF01922-0
ENOM00074-A

2. Throttle grip friction

ENOW00074-B
WARNING
Do not overtighten the throttle adjustment
screw or it could result in difficulty of move-
ment resulting in the loss of control causing
an accident and could lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
1. Heavier
2. Lighter
3. Throttle friction adjustment screw
ENOM00075-0

3. Remote control lever friction

ENOW00074-C
WARNING
Do not over tighten the remote control
throttle friction adjustment screw or it
could result in difficult y of movement
3
1
2
ENOF01923-0