Striking Underwater Object; Operation With Multiple Outboard Motors - TOHATSU M 40D2 Owner's Manual

82
INSPECTION AND MAINTENANCE
the cooling water pump, which may dam-
age the pump, impeller, etc. To avoid this
problem, submerge the lower half of the
outboard motor into the water.
ENOM00107-A

7. Striking underwater object

ENOW00935-0
Striking the sea bottom or an underwater
object may severely damage the outboard
motor.
Follow the procedure below and consult
a dealer as soon as possible.
1. Stop the engine immediately.
2. Check the control system, gear case,
boat transom etc.
3. Return to the nearest harbor slowly
and carefully.
4. Consult a dealer check the outboard
motor before operation again.
10
ENOM00121-0
8. Operation with multiple
outboard motors
When operating the outboard motors in
reverse at more than the lowest speed,
CAUTION
ENOF01145-0
be sure that all engines are running.
If any engine has stopped, be sure to tilt
the outboard motor up and keep its pro-
peller out of the water.
Otherwise, water could enter the engine
and cause damage to it.