Trailering - TOHATSU M 40D2 Owner's Manual

60
REMOVING AND CARRYING THE OUTBOARD MOTOR
Keep the outboard motor in a vertical
position when carrying.
The optional outboard motor stand is
recommended for keeping the outboard
motor vertical both during transport and
storage.
8
ENON00021-C
Note
If the outboard motor must be laid
down, be sure drain the fuel from the
fuel line and carburetor in advance,
then the port side face down on the
cushion as shown in the drawing.
Elevate power unit 2 inches to 4 inches
if traveling to avoid oil spillage.
ENOF01727-0 ENOM00072-C

3. Trailering

ENOW00072-0
Trailering in the tilted position may cause
damage to the outboard motor, boat, etc.
ENOW00073-A
Be sure to disconnect fuel connector except
when operating engine.
Fuel leakage is a fire or explosion hazard,
which can cause serious injury or death.
ENOF01921-0
ENOW00068-0
Close air vent screw of fuel tank and fuel
cock before carrying or storing outboard
motor and fuel tank, or fuel may leak, poten-
tially catching fire.
ENOW00071-0
The tilt support device supplied on your out-
board motor is not intended for towing. It is
ENOF00680-0
CAUTION
WARNING
ENOF00075-1
WARNING
CAUTION