Table of Contents
Advertisement
CONTROL PANEL
Humidity Indicator Down
Timer
Oscillation
POWER
Turn the appliance on/off
MODE Button
Select the function of the unit between SMART / HIGH / LOW / and FAN.
The LED's next to the button will show which mode is selected.
SMART MODE: The unit will default to SMART mode the first time it is
switched on and remains in this mode until another program is chosen. In
smart mode, it will aim for a relative humidity of 50-55%,and the fan speed
will be adjusted automatically.
HIGH: The unit will dehumidify and aim for the humidity set using the up
and down buttons.
LOW: The unit will dehumidify and aim for the humidity set using the up
and down buttons.
FAN: Only the fan will run and water is not extracted. Use with the UV
function for improved air purification
HUMIDITY INDICATOR MODE
When the appliance is first started the indicator light will turn on
automatically. The colour of the indicator light will change according to the
humidity condition of the room it is situated in.
RED: High humidity, RH≥70%
ORANGE: Comfortable, 70%> RH ≥60%
GREEN: Dry, RH<60%
Press the "Humidity Indicator light" button to turn the light on/off.
NOTE: It can take around 2 minutes following a change in the humidity for
the indicator to change colour, e.g. If the humidity drops to 55% it may take
2 minutes before the indicator changes to green.
Up
UV
On/Off
Water tank full
Defrost indicator
7
Mode
Power
Advertisement
Table of Contents
