Using A Terminal Server With Td/Smp; Using Ssu Host Software; Opening Another Session - IBM VGB26 Installation And Operating Information

Multiple Sessions

2.2 Using a Terminal Server with TD/SMP

2.2 Using a Terminal Server with TD/SMP
At the Local> prompt, enter the following command:
Local> set port multi enable
Continue with your login procedure.
To permanently set a terminal server port to use TD/SMP, type:
Local> define port multi enable

2.2.1 Using SSU Host Software

If your VGB26 is connected directly to a host computer without a
terminal server, you can still use TD/SMP by running the Session
Support Utility (SSU) on your host computer. On a system that has
SSU software, such as OSF/1 or OpenVMS, enable sessions as follows:
$ SSU ENABLE
Return

2.2.2 Opening Another Session

Once TD/SMP is enabled, you can open a new session and switch
between them as follows:
1. Press the (Session) key on a VT keyboard; or press
F4
kpd on a PC keyboard.
Caps Lock 0
2. To go directly to a particular session, press
or on the numeric keypad. The session number for the current
4
session is displayed at the lower left of the screen.
2–2 Multiple Sessions
Return
Return
Caps Lock 1
, ,
2 3