4.6.2 Arc calibrate
Automatic calibration can automatically change the fusion parameters in the discharge current until
the test results meet the based on test results.
The test interface is shown in Figure 4.21. When calibration is completed, we need to press the
button "SET" once in the standby interface.
4.7. Status
The status menu gives the atmospheric pressure, the internal temperature, the ambient temperature
and the remaining power, as shown in Figure 4.22.
FIGURE 4.21
FIGURE 4.22
USER MANUAL HANDHELD FTTX FUSION SPLICER FUSION SPLICER 4.3
26