Cuckoo CRP-G10 Fuzzy Series Operating Instructions Manual page 37

▼ If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
When you smell after and
before cooking?
When cannot turn to
" "
開啟
When the top cover cannot
open although the
Lock/Unlock handle is turned
to " "
開啟
When "tick, tick" sounds
occurs while cooking and
warming
When the steam exhausted
Between the top cover.
When the "Cancel" button
Does not operate while
cooking.
When the warning sound
rings. The Lock lamp and the
Preset Time (4, 6, 8, 10) lamp
blink in turn.
Check points
•Did you clean it after cooking?
•Is the inner pot correctly inserted in the main
body?
•Is the Lock/Unlock handle on the top cover
set to " 關閉 "?
•Is there hot food in the inner pot?
•IIs it the sound of cooking?
•Did you wipe the moisture of bottom of
inner pot?
•Is there an External substance on the
Packing?
•Is packing too old?
•Is the inner pot hot?
•It shows on the display when pressing
"Pressure Cook" button again, or when the
cooking has finished and you've never ever
開啟
open turned the handle to '
CHECK BEFORE ASKING
Do the following
•Please clean it after cooking.
•Please put in the inner pot perfectly.
•Please turn the Lock/Unlock handle to "
•Pull the pressure handle to the Side once and allow
the steam to release.
•Because of the pressure.
•Pull the pressure handle to aside once and exhaust
the steam perfectly.
•It is normal that the "tick, tick" sound is an on and
off operation.
•The moisture of the bottom of the inner pot may
cause "tick, tick" sound. Please wipe the moisture.
•Clean the packing with duster.
•Keep the packing clean.
•If the steam is exhausted through the top cover,
please power off the contact the service center and
Dealer.
•Packing life cycle is 12 month, please replace the
packing per 1year
•Keep pressing the "Cancel" button for 2 seconds for
safety reason if you want to cancel while cooking.
•Be careful of hot steam emission or hot contents
spattered from the automatic steam outlet during
cancellation.
•It can be solved by turning handle to '
then turn to ' 關閉
'.
FOR SERVICE
關閉
"
開啟' and
'
37