Clock Functions - Electrolux OED3H50TK User Manual

12 www.electrolux.com
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION!
Do not refill the cavity
embossment during
cooking or when the
oven is hot.

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
8.2 Setting the time. Changing
the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MIND‐
ER
2. Put food in the oven and close the
Refer to "Hints and tips" chapter.
3. Set the function:
4. Press: Plus Steam
It works only with the function: True Fan
Cooking PLUS.
The indicator turns on.
5. Turn the control knob to set
6. Turn the knob for the heating
The indicator turns off.
7. Remove water from the cavity
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on
the operation of the appliance. You can set the MINUTE
MINDER at any time, also when the appliance is off.
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
oven door.
temperature.
functions to the off position, press
Plus Steam to turn off the oven.
embossment.
WARNING!
Make sure that the oven
is cold before you
remove the remaining
water from the cavity
embossment.
or to set the correct
.
.