NOTICE! DO NOT discard any hardware while
servicing.
It must be reused.
This manual will assist a qualified service technician in the
replacement of parts. Contact your dealer to arrange a
service call by a qualified service technician.
Replacement parts include:
Description
Front
Glass
Interior Side Panels
Log/Grate Assembly
Flame Screen
Remote
LED Lighting
Heater/Control Board
Assembly
Rotisserie Motor and
Rod
Remote Receiver
Hardware
WARNING: If the information in these
instructions is not followed exactly
it may result in personal injury and/or
property damage.
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during
installation and service. Sheet metal edges are sharp.
Tools and Supplies Needed
Before beginning the installation be sure that the following
tools and building supplies are available.
Pliers
Phillips screwdriver
Safety glasses
Flat blade screwdriver
SERVICE MANUAL
Model: SF-INS25, SF-INS30, SF-INS35
- Instructions -
Part Number(s)
STFRONT-INS**
FT-MISSION-**
GLAS-INS**
PANEL-INS**
LOG-INS**
FLAM-INS**
REMOTE-INS30
LED-INS**
HEAT-INS**
ROTISS-INS**
RECEIVER-ELECT
HRDW-BI
SimpliFire • SF-INS25, SF-INS30, SF-INS35 Service Manual • 2042-960 • 3/21
Replacement Instructions
WARNING! Risk of Shock!
Always disconnect power before
disassembly or servicing.
Front Replacement (STFRONT-INS** /
FT-MISSION-**)
1. If necessary, place a drop cloth or other material on
the hearth or flooring to prevent scratching.
2. Grasp front with two hands. Lift up and off of the ap-
pliance.
3. Install replacement front by aligning the hooks on the
back side of the door to the slots in the appliance.
Press evenly down with two hands to fully engage the
front to the appliance.
1
Need help?
Do you have a question about the SF-INS25 and is the answer not in the manual?
Questions and answers