Troubleshooting - Axis AX-513 Manual

TROUBLESHOOTING

PROBLEM
The oven is completely OFF.
There is no water coming
from solenoid.
Non-uniform cooking
Non-uniform cooking
The oven is completely OFF
There is no water inflow
from the humidifier pipes
Water leaking from the
gaskets with the door open
Water leaking from the
gaskets with the door open
The fan stops while the oven
is on
Light does not work
CHECK
Safety thermostat
Water inlet is closed
.
Incorrect connection to water
Fan(s) no longer invert rotation
during cooking
One of the fans is not
working
Heating element is defective
Supply voltage inadequate
Incorrect connection to
power supply network
Water filter is blocked with
impurities
Dirty lining
Damaged Gasket
Door does not close properly
Safety Thermostat or
motor may be defective
Motor Capacitor defective
Loose light bulb
Light bulb is burnt
20
ACTION
Requires service technician for
repair
Open water inlet valve
Check connection to water supply
Requires service technician for
repair
Requires service technician for
repair
Requires service technician for
repair
Check breaker or fuse
Check connection to power supply
Clean filter
Clean lining with damp cloth
Replace gasket
Verify door mechanism
Turn off the oven and wait for the
motor's thermal protection to reset
itself. If the problem persists call a
specialised repair technician
Requires service technician for
repair
Correctly fit bulb in socket
Replace light bulb