Axis AX-513 Manual page 14

CONVECTION OVEN QUICK GUIDE
Programming
Press P/M; P 01 will blink.
Press up or down arrow to choose a program.
The given program will blink/flash for 4 seconds.
Press Start to begin program
The indicator light on the right will show which phase it is currently in.
To change the parameters
Press F to select the phase.
Press the clock symbol, time will blink. Press the arrows to change the time.
Once the change is made, wait 3 seconds or press the clock symbol again.
Press arrows to change the temperature. Temperature will blink while you are
changing it. Wait 3 seconds after your done or press the clock symbol again.
Press steam symbol to inject water in the cooking chamber. Choose a
percentage (0,20,40,60,80 and 100%). This should be done when temperature
is right (+200f). Normally it will be set at F2 & F3.
Press F to select the next phase.
Once all your changes are done, press and hold P/M 4 seconds to record the
changes. It will emit a beeping sound when it is done.
14