Axis AX-513 Manual page 13

CONVECTION OVEN QUICK GUIDE
Press the ON/OFF button
Unit is in Manual Mode
Firmly press the clock symbol to change times. "END" will flash
Up arrow will increase by minutes
Down arrow, from end will go to "Infi" , the unit will run until the user decides
to stop it.
The chosen time will flash for 3 seconds then stop flashing.
Pressing the UP or Down arrow will change the temperature. When the
temperature is flashing, press the arrows to change the setting. Once it has
stopped flashing the unit is ready to start.
Firmly press firmly start to begin cooking.
When the unit has finished the given time, it will emit a beeping sound.
If you open the door during the cooking time, the clock will stop and only
continue cooking once the door is closed again.
Unit can inject steam manually during the cooking time by pressing the steam
symbol
Note; It is not recommended to inject steam/water if the unit is not at least
200F.
Note: The fan motors will stop after 90 seconds, then change direction 20
seconds later.
13