Voxelab Proxima 8.9 Quick Start Manual page 2

Note Every 3D printer has passed the printing test before leaving the factory.
It is normal if there is residual material in the resin box or a slight scratch
on the build plate and does not affect the use.
Dear User:
Thank you for choosing and using the Voxelab products. Thank you for your
support and help to Voxelab Technology.The Voxelab products have excellent
quality and performance. For your convenience, please read this guide carefully
before use and follow the guide strictly. The Voxelab team is always ready
to provide you with the perfect service.Please contact us with phone or email
listed in the guide, if you have any problems.In order to better experience our
products, you can also get operational knowledge of the equipment from the
following way:
Quick Starter Guide
Users will find the Quick Start Guide together with the printer accessories. The
Quick Start Guide will help you start your print journey as soon as possible.
Website
www.voxelab3dp.com
The official Voxelab website contains the up-to-date information concerning
Voxelab software, firmware, device maintenance and so on. Users are also
able to get the contact information from there.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND
NOTICE BELOW ALL THE TIME.
Work Environment Safety
Keep your work place tidy.
Do not operate the Proxima X in flammable liquid, gas or dust environment (The high
temperature generated by Proxima X operation may react with dust,
liquid, and flammable gas in the air to cause a fire.)
Children and untrained people are not allowed to operate alone.
Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
Foreword
Notice
Place Requirements
The device must be placed in a dry and ventilated
environment. The distances of the left, right and
back side space should be at least 20cm, and the
distance of the front side space should be at least
35cm.
01