HighSecLabs SC21H-3 Quick Setup Manual page 7

Table of Contents SECTIONS
OPERATION
Operating in User Mode
The User mode (default) is the KVM Combiner's normal use
mode.
To enter User mode, press: Left Ctrl | Left Ctrl | u
Note: To clear all settings and restore the device to its original
configuration, press: Left Ctrl | Left Ctrl | F11 | r
This section shows you how to:
•
Change between a wide variety of display layouts
•
Switch mouse-and-keyboard control between the two
computers
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1 2 3
7